Electrocatalytic performance of the carbon supported Pd-P catalyst for formic acid oxidation
-
摘要: 用黄磷作原料,制备了具有不同Pd-P原子比的碳载Pd-P(Pd-P/C)催化剂,并且使用X射线衍射(XRD)和能量色散X射线光谱仪(EDX)等手段对制备的催化剂进行了表征,总结了P含量对Pd-P合金纳米粒子的粒径和晶体结构的影响。电化学测试结果表明,甲酸在Pd/C、Pd1P6/C 和Pd1P8/C催化剂上,氧化峰峰电位由低到高依次为Pd1P6/C ﹤Pd1P8/C﹤Pd/C,电化学稳定性顺序为Pd1P6/C >Pd1P8/C>Pd/C,Pd1P6/C 催化剂对甲酸氧化的催化性能最佳,适量的P掺杂能够增强Pd/C催化剂对甲酸氧化的电催化活性和稳定性,因此,Pd-P/C催化剂是一类具有应用前景的直接甲酸燃料电池(DFAFC)阳极催化剂。
-
关键词:
- 直接甲酸燃料电池,Pd-P/C催化剂 /
- 甲酸氧化 /
- 电催化性能
Abstract: The Pd-P/C catalyst with the high content of P0 was successfully prepared with the organic impregnation-reduction method. Pd-P/C catalysts with different Pd/P atomic ratios were characterized by X-ray diffraction (XRD), Energy Dispersive X-ray Spectrometer (EDX). The effect of Pd-P/C catalysts with different Pd/P atomic ratios on the oxidation of formic acid was also demonstrated by several electrochemical measures. It was found that the potential of the anodic peak of formic acid at catalyst electrodes increased in the order of Pd1P6/C < Pd1P8/C < Pd/C, and the electrochemical stability of three electrodes was in the order of Pd1P6/C > Pd1P8/C > Pd/C. The Pd1P6 catalyst showed the best performance for the oxidation of formic acid. The Pd-P/C catalysts with the suitable atomic ratio of Pd and P had higher activity and stability for the oxidation of formic acid.-
Key words:
- direct formic acid fuel cells /
- Pd-P/C catalysts /
- formic acid oxidation
-
BAIK S M, HAN J, KIM J, KWON Y. Effect of deactivation and reactivation of palladium anode catalyst on performance of direct formic acid fuel cell (DFAFC)[J]. Int J Hydrogen Energy, 2011, 36(22): 14719-14724. BAIK S M, KIM J, HAN J, KWON Y. Performance improvement in direct formic acid fuel cells (DFAFCs) using metal catalyst prepared by dual mode spraying[J]. Int J Hydrogen Energy, 2011, 36(19): 12583-12590. QU W L, WANG Z B, JIANG Z Z, GU D M, YIN G P. Investigation on performance of Pd/Al2O3-C catalyst synthesized by microwave assisted polyol process for electrooxidation of formic acid[J]. Rsc Advances, 2012, 2(1): 344-350. RHEE Y W, HA S Y, MASEL R I. Crossover of formic acid through Nafion membranes[J]. J Power Sources, 2003, 117(1): 35-38. CAPON A, PARSONS R. The oxidation of formic acid on noble metal electrodes: II. A comparison of the behaviour of pure electrodes[J]. J Electroanal Chem Int Eletronanal Chem, 1973, 44(2): 239-254. KWON Y, BAIK S M, HAN J, KIM J. Performance enhancement by adaptation of long term chronoamperometry in direct formic acid fuel cell using palladium anode catalyst[J]. B Korean Chem Soc, 2012, 33(8): 2539-2545. WANG R, LIAO S, JI S. High performance Pd-based catalysts for oxidation of formic acid[J]. J Power Sources, 2008, 180(1): 205-208. LI R, WEI Z, HUANG T, YU A. Ultrasonic-assisted synthesis of Pd-Ni alloy catalysts supported on multi-walled carbon nanotubes for formic acid electrooxidation[J]. Electrochimica Acta, 2011, 56(19): 6860-6865. CHIOU Y J, CHEN K Y, LIN H M, LIOU W J, LIOU H W, WU S H, MIKOLAJCZUK A, MAZURKIEWICZ M, MALOLEPSZY A, STOBINSKI L, BORODZINSKI A, KEDZIERZAWSKI P, KURZYDLOWSKI K, CHIEN S H, CHEN W C. Electrocatalytic properties of hybrid palladium-gold/multi-walled carbon nanotube materials in fuel cell applications[J]. Phys Status Solidi A, 2011, 208(8): 1778-1782. DAIMON H, KUROBE Y. Size reduction of PtRu catalyst particle deposited on carbon support by addition of non-metallic elements[J]. Catal Today, 2006, 111(3): 182-187. OKAMOTO Y, NITTA Y, IMANAKA T, TERANISHI S. Surface state and catalytic activity and selectivity of nickel catalysts in hydrogenation reactions: III. Electronic and catalytic properties of nickel catalysts[J]. J Catal, 1980, 64(2): 397-404. XUE X, GE J, LIU C, XING W, LU T. Novel chemical synthesis of Pt-Ru-P electrocatalysts by hypophosphite deposition for enhanced methanol oxidation and CO tolerance in direct methanol fuel cell[J]. Electrochem Commun, 2006, 8(8): 1280-1286. XUE X, GE J, TIAN T, LIU C, XING W, LU T. Enhancement of the electrooxidation of ethanol on Pt-Sn-P/C catalysts prepared by chemical deposition process[J]. J Power Sources, 2007, 172(2): 560-569. ZHANG L, TANG Y, BAO J, LU T, LI C. A carbon-supported Pd-P catalyst as the anodic catalyst in a direct formic acid fuel cell[J]. J Power Sources, 2006, 162(1): 177-179. ZHANG L, LU T, BAO J, TANG Y, LI C. Preparation method of an ultrafine carbon supported Pd catalyst as an anodic catalyst in a direct formic acid fuel cell[J]. Electrochem Commun, 2006, 8(10): 1625-1627. BONINO J P, BRUET-HOTELLAZ S, BORIES C, POUDEROUX P, ROUSSET A. Thermal stability of electrodeposited Ni-P alloys[J]. J Appl Electrochem, 1997, 27(10): 1193-1197. SUN H, XU J, FU G, MAO X, ZHANG L, CHEN Y, ZHOU Y, LU T, TANG Y. Preparation of highly dispersed palladium-phosphorus nanoparticles and its electrocatalytic performance for formic acid electrooxidation[J]. Electrochimica Acta, 2012, 59: 279-283. CHENG L, ZHANG Z, NIU W, XU G, ZHU L. Carbon-supported Pd nanocatalyst modified by non-metal phosphorus for the oxygen reduction reaction[J]. J Power Sources, 2008, 182(1): 91-94. PAN Y, ZHANG R, BLAIR S L. Anode poisoning study in direct formic acid fuel cells[J]. Electrochem Solid State Lett, 2009, 12(3): B23-B26. YANG G, CHEN Y, ZHOU Y, TANG Y, LU T. Preparation of carbon supported Pd-P catalyst with high content of element phosphorus and its electrocatalytic performance for formic acid oxidation[J]. Electrochem Commun, 2010, 12(3): 492-495. YU X, PICKUP P G. Novel Pd-Pb/C bimetallic catalysts for direct formic acid fuel cells[J]. J Power Sources, 2009, 192(2): 279-284.
点击查看大图
计量
- 文章访问数: 1127
- HTML全文浏览量: 18
- PDF下载量: 647
- 被引次数: 0