Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium

Sunitha. M; Durgadevi. N; Asha Sathish; Ramachandran. T

Volume 46 Issue 5

May 2018

Turn off MathJax

Article Contents

Article Navigation > Journal of Fuel Chemistry and Technology > 2018 > 46(5): 592-599

Sunitha. M, Durgadevi. N, Asha Sathish, Ramachandran. T. Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium[J]. Journal of Fuel Chemistry and Technology, 2018, 46(5): 592-599.

Citation:

Sunitha. M, Durgadevi. N, Asha Sathish, Ramachandran. T. Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium[J]. Journal of Fuel Chemistry and Technology, 2018, 46(5): 592-599.

Citation:

PDF( 2518 KB)

Performance evaluation of nickel as anode catalyst for DMFC in acidic and alkaline medium

Department of Sciences, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Coimbatore 641112, India

More Information

Corresponding author: Asha Sathish, E-mail: s_asha@cb.amrita.edu
Received Date: 2017-12-13
Rev Recd Date: 2018-02-21

Available Online: 2021-01-23

Publish Date: 2018-05-10

Abstract

Abstract

Direct methanol fuel cell (DMFC) research is highly focused due to its high energy density, portability and inexpensive. In the present study conventional platinum catalyst used for methanol oxidation is being replaced with nickel catalyst supported over nickel mesh. The electrode is synthesized by single step electro deposition technique. Synthesized electrode was characterized by SEM, EDAX and AFM techniques to know the surface morphology, composition and thickness of the catalyst respectively. The electro catalytic behavior of the nickel for methanol oxidation was evaluated using cyclic voltammetry technique. As the DMFC is compatible with both the acidic and alkaline electrolytes the working of the nickel mesh electrode is analyzed in both media. The results showed maximum current density of 0.025 and 0.030 A/cm² in alkaline and acidic medium respectively with less potential around 0.4 and 0.2 V. The other parameters such as varying the concentration of methanol, electrolyte medium, scan rate and thickness of the catalytic layer were analyzed and optimized.
- direct methanol fuel cell,
- electro oxidation,
- catalytic activity,
- electrolyte medium

FullText(HTML)

References(39)

References

[1]	YI Q, HUANG W, JZHANG J, LIU X, LI L. Methanol oxidation on titanium-supported nano-scale Ni flakes[J]. Catal Commun, 2008, 9(10):2053-2058. doi: 10.1016/j.catcom.2008.03.051
[2]	QIAO Y, LI C. Nanostructured catalysts in fuel cells[J]. J Mater Chem, 2011, 21(12):4027-4036. doi: 10.1039/C0JM02871A
[3]	ANTOLINI E, SALGADO J, GONZALEZ E. The methanol oxidation reaction on platinum alloys with the first row transition metals-The case of Pt-Co and-Ni alloy electrocatalysts for DMFCs:A short review[J]. Appl Catal B:Environ, 2006, 63(1/2):137-149. https://www.sciencedirect.com/science/article/pii/S0926337305003498
[4]	COLMENARES L, GUERRINI E, JUSYS X, NAGABHUSHANA K S, DINJUS E, BEHRENS S, HABICHT W, BONNEMANN H, BEHM R J. Activity, selectivity, and methanol tolerance of novel carbon-supported Pt and Pt₃Me (Me=Ni, Co) cathode catalysts[J]. J Appl Electrochem, 2007, 37(12):1413-1427. doi: 10.1007/s10800-007-9353-x
[5]	FENG Y, YANG J, LIU H, YE F, YANG J. Selective electrocatalysts toward a prototype of the membraneless direct methanol fuel cell[J]. Scientific Reports, 4, 3813, 1-7, DOI: 10.1038/srep03813.
[6]	WANG C, REN F, ZHAI C, ZHANG K, YANG B, BIN D, WANG H, YANG P, DU Y. Au-Cu-Pt ternary catalyst fabricated by electro deposition and galvanic replacement with superior methanol electro oxidation activity[J]. RSC Adv, 2014, 4(101):57600-57607. doi: 10.1039/C4RA08949A
[7]	JING M, JIANG L, YI B, SUN G. Comparative study of methanol adsorption and electro-oxidation on carbon supported platinum in acidic and alkaline electrolytes[J]. J Electroanal Chem, 2013, 68:172-179. https://www.sciencedirect.com/science/article/pii/S1572665712004481
[8]	AMIN R S, HAMEED R M A, EL-KHATIB K M. Microwave heated synthesis of carbon supported Pd, Ni and Pd-Ni nanoparticles for methanol oxidation in KOH solution[J]. Appl Catal B:Environ, 2014, 148:557-567. https://www.sciencedirect.com/science/article/pii/S0926337313007054
[9]	ANTOLINI E, GONZALEZ E R. Effect of synthesis method and structural characteristics of Pt-Sn fuel cell catalysts on the electro-oxidation of CH₃OH and CH₃CH₂OH in acid medium[J]. Cataly Today, 2011, 160(1):28-38. doi: 10.1016/j.cattod.2010.07.018
[10]	LIMA A, COUTANCEAU C, LEA J M, LAMY C. Investigation of ternary catalysts for methanol electro oxidation[J]. J Appl Electrochem, 2001, 31(4):376-386. http://cn.bing.com/academic/profile?id=b382d06dae934780e309328aeaa9d8b9&encoded=0&v=paper_preview&mkt=zh-cn
[11]	HSIEH C, WEI J, LIN J, HAO B. Preparation of Pt-Co nanocatalysts on carbon nanotube electrodes for direct methanol fuel cells[J]. Diamond Relat Mater, 2011, 20(7):1065-1071. doi: 10.1016/j.diamond.2010.10.009
[12]	XIONG L, YANG X, XU M, XU Y, WU D. Pt-Ni alloy nanoparticles supported on multiwalled carbon nanotubes for methanol oxidation in alkaline media[J]. J Solid State Electrochem, 2013, 17(3):805-810. doi: 10.1007/s10008-012-1905-2
[13]	SANDOVAL-GONZ'ALEZ A, BORJA-ARCO E, ESCALANTE J, JIM'ENEZ O, GAMBOA S A. Methanol oxidation reaction on PtSnO2 obtained by microwave-assisted chemical reduction[J]. Int J Hydrogen Energy, 2012, 37(2):1752-1759. doi: 10.1016/j.ijhydene.2011.10.049
[14]	PARK K W, CHOI J H, LEE S A, PAK C, CHANG H, SUNG Y E. PtRuRhNi nanoparticle electro catalyst for methanol electro oxidation in direct methanol fuel cell[J]. J Catal, 2004, 224(2):236-242. doi: 10.1016/j.jcat.2004.02.010
[15]	RAHIM M A A, HAMEED R M H, KHALIL M W. Nickel as a catalyst for the electro-oxidation of methanol in alkaline medium[J]. J Power Sources, 2004, 134(2):160-169. doi: 10.1016/j.jpowsour.2004.02.034
[16]	SKOWRONI J M, ZNYN A W. Nickel foam-based composite electrodes for electro oxidation of methanol[J]. J Solid State Electrochem, 2005, 9(12):890-899. doi: 10.1007/s10008-005-0046-2
[17]	GOLIKAND A N, ASGARI M, GHANNADI M, SHAHROKHIAN S M. Methanol electro oxidation on a nickel electrode modified by nickel-dimethylglyoxime complex formed by electrochemical synthesis[J]. J Electroanaly Chem, 2006, 588(1):155-160. doi: 10.1016/j.jelechem.2005.11.033
[18]	DURGADEVI N, SUNITHA M, ASHA S, GUHAN S, RAMACHANDRAN T. Electro oxidation of methanol on Ni/Ni-Co coated SS mesh electrode[J]. Indian J Sci Technol, 2016, 9(1):1-10. http://cn.bing.com/academic/profile?id=ed6b58240eea90464a0243142d7c5a51&encoded=0&v=paper_preview&mkt=zh-cn
[19]	DAS S, DUTTA K, KUNDU P P. Nickel nanocatalysts supported on sulfonated polyaniline:Potential toward methanol oxidation and as anode materials for DMFCs[J]. J Mater Chem A, 2015, 3(21):11349-11357. doi: 10.1039/C5TA01837D
[20]	TOMINAKA S, MOMMA T, OSAKA T. Electrodeposited Pd-Co catalyst for direct methanol fuel cell electrodes:Preparation and characterization[J]. Electrochim Acta, 2008, 53(14):4679-4686. doi: 10.1016/j.electacta.2008.01.069
[21]	YU E H, SCOTT K. Direct methanol alkaline fuel cell with catalyzed metal mesh anodes[J]. Electrochem Commun, 2004, 6(21):361-365. doi: 10.1016/j.elecom.2004.02.002
[22]	YI Q, HUANG W, YU W, LI L, LIU X P. Fabrication of novel titanium-supported Ni-Sn catalysts for methanol electro-oxidation[J]. Chin J Chem, 2008, 26(8):1367-1372. doi: 10.1002/cjoc.v26:8
[23]	HOSSEINI M G, ABDOLMALEKI M, ASHRAFPOOR S. Methanol electro oxidation on a porous nanostructured Ni/PdNi electrode in alkaline media[J]. Chin J Catal, 2013, 34(9):1712-1719. doi: 10.1016/S1872-2067(12)60643-3
[24]	TELLI E, SOLMAZ R, KARDA G. Electro catalytic oxidation of methanol on Pt/NiZn electrode in alkaline medium[J]. Russian J Electrochem, 2011, 47(7):811-818. doi: 10.1134/S1023193511070135
[25]	SHEIKH A M, EBN-ALWALED ABD-AlFTAH K, MALFATTI C F. On reviewing the catalyst materials for direct alcohol fuel cells (DAFCs)[J]. JMEST, 2014, 1(3):1-10. http://www.jmest.org/wp-content/uploads/JMESTN42350050.pdf
[26]	SEROV A, KWAK C. Review of non-platinum anode catalysts for DMFC and PEMFC application[J]. Appl Catal B:Environ, 2009, 90(3/4):313-320. https://www.sciencedirect.com/science/article/pii/S0926337309001246
[27]	TRIPKOVIC A V, POPOVIC K D, GRGUR B N, BLIZANAC B, ROSS P N, MARKOVIC N M. Methanol electro oxidation on supported Pt and Pt/Ru catalysts in acid and alkaline solutions[J]. Electrochim Acta, 2002, 47(22/23):3707-3714. doi: 10.1016/S0013-4686(02)00340-7
[28]	JAFARIAN M, MOGHADDAM R B, MAHJANI M G, GOBAL A F. Electro-catalytic oxidation of methanol on a Ni-Cu alloy in alkaline medium[J]. J Appl Electrochem, 2006, 36(8):913-918. doi: 10.1007/s10800-006-9155-6
[29]	MATHIYARASU J, REMONA A M, MANI A, PHANI K L N, YEGNARAMAN V. Exploration of electrodeposited platinum alloy catalysts for methanol electro-oxidation in 0.5 M H₂SO₄[J]. J Solid State Electrochem, 2004, 8(12):968-975. doi: 10.1007/s10008-004-0526-9
[30]	SANLI A E, AYTAÇ A. Electrochemistry of the nickel electrode as a cathode catalyst in the media of acidic peroxide for application of the peroxide fuel cell[J]. J Electrochem Soc, 2012, 42(1):3-22. https://www.researchgate.net/profile/Ayse_Elif_Sanli/publication/278080397_Electrochemistry_of_The_Nickel_Electrode_as_a_Cathode_Catalyst_In_The_Media_Of_Acidic_Peroxide_For_Application_of_The_Peroxide_Fuel_Cell/links/5704fee108ae44d70ee30320.pdf?origin=publication_list
[31]	PEIRIS M C R, UDUGALA-GANEHENEGE M Y. Electro catalytic activity of (Bis (salicylaldehyde) ethylenediamino) Ni (I) complex for CO₂ reduction[J]. INJSED, 2016, 7(2):91-94. https://www.researchgate.net/publication/279514868_Electrocatalytic_Activity_of_BissalicylaldehydeethylenediaminoNiII_Complex_for_CO2_Reduction
[32]	BARAKAT N A M, MOTLAK M, KIM B, EL-DEEN A, HAMZAF A M. Carbon nanofibers doped by Ni_xCo_1-x alloy nanoparticles as effective and stable non precious electro catalyst for methanol oxidation in alkaline media[J]. J Mol Catal A:Chem, 2014, 394:177-187. doi: 10.1016/j.molcata.2014.07.011
[33]	RISBUD M S, BAXTER S, SKYLLAS-KAZACOS M. Preparation of nickel modified carbon fibre electrodes and their application for methanol oxidation[J]. Open Fuels Energy Sci J, 2012, 5:9-20. doi: 10.2174/1876973X01205010009
[34]	SANTASALO-AARNIO A, TUOMI S, JALKANEN K, KONTTURI K, KALLIO T. The correlation of electrochemical and fuel cell results for alcohol oxidation in acidic and alkaline media[J]. Electrochim Acta, 2013, 87:730-738. doi: 10.1016/j.electacta.2012.09.100
[35]	TARRUS X, MONTIEL M, VALLES R, GOMEZ E. Electro catalytic oxidation of methanol on CoNi electrodeposited materials[J]. Int J Hydrogen Energy, 2014, 39(12):6705-6713. doi: 10.1016/j.ijhydene.2014.02.057
[36]	OJANI R, RAOOF J, ZAVVARMAHALLEH S R H. Electro catalytic oxidation of methanol on carbon paste electrode modified by nickel ions dispersed into poly (1, 5-diaminonaphthalene) film[J]. Electrochimi Acta, 2008, 53(5):2402-2407. doi: 10.1016/j.electacta.2007.10.004
[37]	HAMEED R M A, AMIN R S. Influence of metal oxides on platinum activity towards methanol oxidation in H₂SO₄ solution[J]. Chem Phys Chem, 2016, 17(7):1054-1061. doi: 10.1002/cphc.v17.7
[38]	ALLEN R, CHAN L, YANG L, SCOTT K, ROY S. Novel anode structure for direct methanol fuel cell[J]. J Power Sources, 2005, 143(1/2):142-149. https://www.sciencedirect.com/science/article/pii/S0378775304011966
[39]	DENG Z, YI Q, ZHANG Y, NIE H. NiCo/C-N/CNT composite catalysts for electro-catalytic oxidation of methanol and ethanol[J]. J Electroanal Chem, 2017, 803:95-103. doi: 10.1016/j.jelechem.2017.09.025