Effect of Ce metal modification on the hydrothermal stability of Cu-SAPO-34 catalyst

MAO Jing-wen; XU Bin; HU Yi-kang; ZHANG Chang-yuan; MENG Hui-min

Volume 48 Issue 10

Oct. 2020

Turn off MathJax

Article Contents

Article Navigation > Journal of Fuel Chemistry and Technology > 2020 > 48(10): 1208-1215

MAO Jing-wen, XU Bin, HU Yi-kang, ZHANG Chang-yuan, MENG Hui-min. Effect of Ce metal modification on the hydrothermal stability of Cu-SAPO-34 catalyst[J]. Journal of Fuel Chemistry and Technology, 2020, 48(10): 1208-1215.

Citation:

MAO Jing-wen, XU Bin, HU Yi-kang, ZHANG Chang-yuan, MENG Hui-min. Effect of Ce metal modification on the hydrothermal stability of Cu-SAPO-34 catalyst[J]. Journal of Fuel Chemistry and Technology, 2020, 48(10): 1208-1215.

Citation:

PDF( 9005 KB)

Effect of Ce metal modification on the hydrothermal stability of Cu-SAPO-34 catalyst

1.
School of Vehicle and Transportation Engineering, Henan University of Science and Technology, Luoyang 471003, China
2.
Henan International Joint Laboratory for Energy Saving and Pollutant Control of Energy Power Plants, Luoyang 471003, China

Funds:

National Key Research and Development Program "Development of New Energy-saving and Environmentally Friendly Agricultural Engines 2106YFD0700700

More Information

Corresponding author: XU Bin,Tel:13938823801, E-mail:xu64327@163.com
Received Date: 2020-09-07
Rev Recd Date: 2020-09-21

Available Online: 2021-01-23

Publish Date: 2020-10-10

Abstract

Abstract

A series of copper-cerium composite oxide molecular sieve catalysts (Cu-Ce/SAPO-34) were prepared by impregnation method, and the effects of Ce loading on the hydrothermal stability of Cu/SAPO-34 catalyst were discussed. The reasons for the difference in activity and stability of different catalysts were analyzed by XRD, SEM, H₂-TPR, XPS, and NH₃-TPD. The present study showed that hydrothermal aging at 750 ℃ did not cause the chabazite (CHA) framework of Cu-Ce/SAPO-34 catalyst to collapse, but destroyed part of the pore structure and acid sites, and reduced the crystallinity of the catalyst surface. Hydrothermal aging promoted tensile distortion of the catalyst lattice, causing Cu²⁺ to migrate to the catalyst surface, and Cu²⁺ and Ce⁴⁺ clustered to form CuO and CeO₂, which resulted in the reduction of the Cu active species and the decrease of the oxygen hole concentration of the catalyst. Therefore, the performance of Cu-Ce/SAPO-34 for the selective catalytic reduction of NO_x by NH₃ (NH₃-SCR) decreased. Ce doping could increase the amount of Cu²⁺ and Cu⁺ active species on the surface of Cu/SAPO-34 catalyst, reduce Cu species clusters to form CuO, and improve the distribution of active Cu species on the catalyst surface. Increasing the loading of Ce could stabilize the structure of Cu-Ce/SAPO-34 catalyst and maintain the medium and weak acid sites, thereby improving its hydrothermal stability. The results indicated that the Cu/Ce mass ratio of 4:5 had the best hydrothermal stability among the series of Cu-Ce/SAPO-34 catalysts in this study.
- catalyst,
- molecular sieves,
- agglomeration,
- desorption,
- reactivity,
- SCR

FullText(HTML)

References(28)

References

[1]	KWAK J H, TRAN D, BURTON S D, SZANYI J, LEE J H, PEDEN C H F. Effects of hydrothermal aging on NH₃-SCR reaction over Cu/zeolites[J]. J Catal, 2012, 287:203-209. doi: 10.1016/j.jcat.2011.12.025
[2]	SCHMIEG S J, OH S H, KIM C H, BROEN D B, LEE J H, PEDEN C H F, KIM D H. Thermal durability of Cu-CHA NH₃-SCR catalysts for diesel NO_x reduction[J]. Catal Today, 2012, 184:252-161. doi: 10.1016/j.cattod.2011.10.034
[3]	KIM Y J, LEE J K, MIN K M, HONG S B, NAM I S, CHO B K. Hydrothermal stability of CuSSZ13 for reducing NO_x by NH₃[J]. J Catal, 2014, 311:447-457. doi: 10.1016/j.jcat.2013.12.012
[4]	DOU B J, LV G, WANG C, HAO Q L, HUI K S. Cerium doped copper/ZSM-5 catalysts used for the selective catalytic reduction of nitrogen oxide with ammonia[J]. Chem Eng J, 2015, 270:549-556. doi: 10.1016/j.cej.2015.02.004
[5]	LI X H, ZHAO Y N, ZHAO H W, LIU M K, MA Y H, YONG X, CHEN H, LI Y D. The Cu migration of Cu-SAPO-34 catalyst for ammonia selective catalytic reduction of NO_x during high temperature hydrothermal aging treatment[J]. Catal Today, 2019, 327:126-133. doi: 10.1016/j.cattod.2018.05.029
[6]	XIANG X, CAO Y, SUN L J, WU P F, CAO L, XU S T, TIAN P, LIU Z M. Improving the low-temperature hydrothermal stability of Cu-SAPO-34 by the addition of Ag for ammonia selective catalytic reduction of NO_x[J]. Appl Catal A:Gen, 2018, 551:79-87. doi: 10.1016/j.apcata.2017.12.001
[7]	WANG D, JANGJOU Y, LIU Y, SHARMA M K, LUO J Y, LI J H, KAMASAMUDRAM K, EPLING W S. A comparison of hydrothermal aging effects on NH₃-SCR of NO_x over Cu-SSZ-13 and Cu-SAPO-34 catalysts[J]. Appl Catal B:Environ, 2015, 165:438-445. doi: 10.1016/j.apcatb.2014.10.020
[8]	PETKOVICH N D, RUDISILL S G, VENSTROM L J, BOMAN D B, DAVIDSON J H, STEIN A. Control of heterogeneity in nanostructured Ce_1-xZr_xO₂ binary oxides for enhanced thermal stability and water splitting activity[J]. J Phys Chem C, 2011, 115(43):21022-21033. doi: 10.1021/jp2071315
[9]	BAIDYA T, GUPTA A, DESHPANDEY P A, MADRAS G, HEGDE M S. High oxygen storage capacity and high rates of CO oxidation and NO reduction catalytic properties of Ce_1-xSn_xO₂ and Ce_0.78Sn_0.2Pd_0.02O_2-δ[J]. J Phys Chem C, 2009, 113(10):4059-4068. doi: 10.1021/jp8060569
[10]	PANG L, FAN C, SHAO L N, SONG K P, YI J X, CAI X, WANG J, KANG M, LI T. The Ce doping Cu/ZSM-5 as a new superior catalyst to remove NO from diesel engine exhaust[J]. Chem Eng J, 2014, 253:394-401. doi: 10.1016/j.cej.2014.05.090
[11]	CAO Y, ZOU S, LAN L, YANG Z Z, XU H D, LIN T, GONG M C, CHEN Y Q. Promotional effect of Ce on Cu-SAPO-34 monolith catalyst for selective catalytic reduction of NO_x with ammonia[J]. J Mol Catal A:Chem, 2015, 398:304-311. doi: 10.1016/j.molcata.2014.12.020
[12]	胡宜康, 徐斌, 曹智锟, 毛静雯. Cu负载量及改性对Cu/SAPO-34催化剂NH₃-SCR性能的影响[J].现代化工, 2020, 40(5):122-127. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=xdhg202005028 HU Yi-kang, XU Bin, CAO Zhi-kun, MAO Jing-wen. Effects of Cu loading and modification on the performance of Cu/SAPO-34 catalyst NH₃-SCR[J]. Mod Chem Ind, 2020, 40(5):122-127. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=xdhg202005028
[13]	QI G, YANG R T. Selective catalytic oxidation (SCO) of ammonia to nitrogen over Fe/ZSM-5 catalysts[J]. Appl Catal A:Gen, 2005, 287:25-33. doi: 10.1016/j.apcata.2005.03.006
[14]	DOU B, LV G, WANG C, HAO Q L, HUI K S. Cerium doped copper/ZSM-5 catalysts used for the selective catalytic reduction of nitrogen oxide with ammonia[J]. Chem Eng J, 2015, 270:549-556. doi: 10.1016/j.cej.2015.02.004
[15]	WANG L, LI W, QI G S, WEN D. Location and nature of Cu species in Cu/SAPO-34 for selective catalytic reduction of NO with NH₃[J]. J Catal, 2012, 289:21-29. doi: 10.1016/j.jcat.2012.01.012
[16]	宿文康. Cu/CHA分子筛选择性催化还原柴油车尾气NO_x的机理研究[D].北京: 清华大学, 2016. SU Wen-kang. Study on the mechanism of Cu/CHA molecular sieve selective catalytic reduction of NO_x in diesel vehicle Exhaust[D]. Beijing: Tsinghua University, 2016.
[17]	KWAK J H, TONKYN R, TRAN D, MEI D H, CHO S J, KOVARIK L, LEE J H, PEDEN C H F, SZANYI J. Size-dependent catalytic performance of CuO on γ-Al₂O₃:NO reduction versus NH₃ oxidation[J]. ACS Catal, 2012, 2(7):1432-1440. doi: 10.1021/cs3002463
[18]	WANG J, HUANG Y, YU T, ZHOU S C, SHEN M Q, LI W, WANG J Q. The migration of Cu species over Cu-SAPO-34 and its effect on NH₃ oxidation at high temperature[J]. Catal Sci Technol, 2014, 4(9):3004-3012. doi: 10.1039/C4CY00451E
[19]	YU C L, HUANG B C, DONG L F, CHEN F, LIU X Q. Effect of Pr/Ce addition on the catalytic performance and SO₂ resistance of highly dispersed MnO_x/SAPO-34 catalyst for NH₃-SCR at low temperature[J]. Chem Eng J, 2017, 316(Complete):1059-1068. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=d63ab1b113a44055ac32a55a0217e785
[20]	WANG L, GAUDET J R, Li W, WANG D. Migration of Cu species in Cu/SAPO-34 during hydrothermal aging[J]. J Catal, 2013, 306(1/2):68-77. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=b683e96e99c5909b591d15c35036bb90
[21]	ZHAO S, HUANG L M, JIANG B Q, CHENG M, ZHANG J W, HU Y J. Stability of Cu-Mn bimetal catalysts based on different zeolites for NO_x removal from diesel engine exhaust[J]. Chin J Catal, 2018, 39(4):800-809. doi: 10.1016/S1872-2067(18)63013-X
[22]	GAO F, WALTER E D, KOLLAR M, WANG Y L, SZANYI J, PEDEN C H F. Understanding ammonia selective catalytic reduction kinetics over Cu/SSZ-13 from motion of the Cu ions[J]. J Catal, 2014, 319:1-14. doi: 10.1016/j.jcat.2014.08.010
[23]	VENNESTROM P N R, KATERINPOULOU A, TIRUVALAM R R, KUSTOV A, MOSES P G, CONCEPCION P, CORMA A. Migration of Cu ions in SAPO-34 and its impact on selective catalytic reduction of NO_x with NH₃[J]. ACS Catal, 2013, 3(9):2158-2161. doi: 10.1021/cs400499p
[24]	LIU J, LI X Y, ZHAO Q D, ZHANG D K, NDOKOYE P. The selective catalytic reduction of NO with propene over Cu-supported Ti-Ce mixed oxide catalysts:Promotional effect of ceria[J]. J Mol Catal A:Chem, 2013, 378, 115-123. doi: 10.1016/j.molcata.2013.06.005
[25]	DUTTA P, PAL S, SEEHRA M S, SHI Y, EYRING E M, ERNST R D. Concentration of Ce³⁺ and oxygen vacancies in cerium oxide nanoparticles[J]. Chem Mater, 2006, 18(21):5144-5146. doi: 10.1021/cm061580n
[26]	VAN KOOTEN W E J, LIANG B, KRIJNSEN H C, OUDSHOORN O L, CALIS H P A, VAN DEN BLEEK C M. Ce-ZSM-5 catalysts for the selective catalytic reduction of NO_x in stationary diesel exhaust gas[J]. Appl Catal B:Environ, 1999, 21(3):203-213. doi: 10.1016/S0926-3373(99)00023-5
[27]	WANG J, YU T, WANG X Q, QI G S, XUE J J, SHEN M Q, LI W. The influence of silicon on the catalytic properties of Cu/SAPO-34 for NO_x reduction by ammonia-SCR[J]. Appl Catal B:Environ, 2012, 127:137-147. doi: 10.1016/j.apcatb.2012.08.016
[28]	CAO Y, LAN L, FENG X, YANG Z Z, ZOU S, XU H D, LI Z Q, GONG M C, CHEN Y Q. Cerium promotion on the hydrocarbon resistance of a Cu-SAPO-34 NH₃-SCR monolith catalyst[J]. Catal Sci Technol, 2015, 5(9):4511-4521. doi: 10.1039/C5CY00704F