新型Ni-Mo/Al2O3加氢脱硫催化剂的研究

新型Ni-Mo/Al2O3加氢脱硫催化剂的研究

  • 摘要: 采用溶胶凝胶技术,制备了双结构Al2O3载体,用此改性载体制备了Ni-Mo/Al2O3催化剂,在中压固定床微反装置上考察了载体改性对催化剂上噻吩加氢脱硫(HDS)活性的影响,并用X射线粉末衍射、透射电镜、吡啶-红外光谱等分析方法对改性载体和催化剂进行了表征。结果表明,由铝溶胶改性载体制备催化剂的加氢脱硫活性均高于未改性载体制备的催化剂的催化活性。XRD和TEM结果表明氧化铝表面负载的铝溶胶经过干燥、焙烧后以纳米尺度的η-Al2O3状态存在,吡啶-红外光谱结果表明,改性氧化铝载体制备催化剂的弱B酸和弱L酸的酸量均提高,强L酸的酸量也明显增加。酸性、酸量的提高和纳米尺度η-Al2O3的存在是催化剂活性提高的主要原因。

     

    Abstract: Binary-structured Al2O3 supports were prepared with sol-gel technique and Ni-Mo/Al2O3 catalysts were prepared by impregnation method with the modified supports. The HDS activity of the catalysts supported by sol-gel modified supports was evaluated in a fixed-bed micro-reactor under moderate-pressures. The results revealed that, the HDS activity of the catalysts on modified support with alumina sol was higher than that of catalysts on ordinary supports. The supports modified and the catalysts prepared were characterized by XRD, TEM and pyridine-IR. The XRD patterns and TEM results indicated that the alumina sol was present in phase of η-Al2O3 on the surface of supports and the η-Al2O3 particles were close to nanometer size. The pyridine-IR results indicated that the acidities (the Brönzed + Lewis) of the catalysts on modified supports are higher than those of the catalysts on ordinary supports. The HDS activities of the catalysts are increased due to the nanometer size of η-Al2O3 and the increase in acidic amounts of the catalysts.

     

/

返回文章
返回