罗耀亚, 王森, 郭淑佳, 原凯, 王浩, 董梅, 秦张峰, 樊卫斌, 王建国. 不同合成方法制备ZnxCe2-yZryO4/SAPO-34催化剂及其合成气制低碳烯烃催化性能的研究[J]. 燃料化学学报(中英文), 2020, 48(5): 594-600.
引用本文: 罗耀亚, 王森, 郭淑佳, 原凯, 王浩, 董梅, 秦张峰, 樊卫斌, 王建国. 不同合成方法制备ZnxCe2-yZryO4/SAPO-34催化剂及其合成气制低碳烯烃催化性能的研究[J]. 燃料化学学报(中英文), 2020, 48(5): 594-600.
LUO Yao-ya, WANG Sen, GUO Shu-jia, YUAN Kai, WANG Hao, DONG Mei, QIN Zhang-feng, FAN Wei-bin, WANG Jian-guo. Study on different synthesis methods of ZnxCe2-yZryO4/SAPO-34 catalyst and its catalytic performance in syngas to low-carbon olefins[J]. Journal of Fuel Chemistry and Technology, 2020, 48(5): 594-600.
Citation: LUO Yao-ya, WANG Sen, GUO Shu-jia, YUAN Kai, WANG Hao, DONG Mei, QIN Zhang-feng, FAN Wei-bin, WANG Jian-guo. Study on different synthesis methods of ZnxCe2-yZryO4/SAPO-34 catalyst and its catalytic performance in syngas to low-carbon olefins[J]. Journal of Fuel Chemistry and Technology, 2020, 48(5): 594-600.

不同合成方法制备ZnxCe2-yZryO4/SAPO-34催化剂及其合成气制低碳烯烃催化性能的研究

Study on different synthesis methods of ZnxCe2-yZryO4/SAPO-34 catalyst and its catalytic performance in syngas to low-carbon olefins

  • 摘要: 通过溶胶凝胶法、水热法、共沉淀法合成了不同的ZnxCe2-yZryO4金属氧化物,并对其结构性质进行了XRD、BET、HRTEM、CO-TPD、Raman以及XPS等多种技术表征。考察不同合成方法(溶胶-凝胶法、共沉淀法和水热法)所制备的ZnxCe2-yZryO4金属氧化物形貌、晶粒粒径和氧空穴浓度变化情况,及其对合成气制低碳烯烃性能的影响。结果表明,ZnxCe2-yZryO4固溶体的形貌、暴露晶面、晶粒粒径和表面氧空穴浓度强烈依赖于合成方法。在300 ℃、1.0 MPa条件下,采用溶胶-凝胶法制备的ZnxCe2-yZryO4与SAPO-34组成的双功能催化剂具有最高的低碳烯烃(C2-4=)选择性(79.5%),同时甲烷和CO2的选择性分别仅为5.5%和10.7%。实现了低温低压条件直接转化合成气制低碳烯烃,同时大幅降低了甲烷和CO2的释放。

     

    Abstract: A series of ZnxCe2-yZryO4 metal oxides were synthesized by sol gel method, hydrothermal method and co-precipitation method respectively and characterized by XRD, BET, HRTEM, CO-TPD, Raman and XPS. The effects of the synthesis method on the morphology, grain size and oxygen vacancy concentration and the catalytic performance in syngas to low-carbon olefin reaction of the ZnxCe2-yZryO4 catalysts were investigated. The results show that the shape, exposed crystal surface, grain size and surface oxygen vacancy concentration of ZnxCe2-yZryO4 solid solution are strongly dependent on the synthesis method. Under the reaction conditions of 300 ℃ and 1.0 MPa, the dual-functional catalysts of ZnxCe2-yZryO4/SAPO-34 prepared by sol-gel method have the highest low-carbon olefin (C2-4=) selectivity (79.5%), while the selectivities of methane and CO2 are only 5.5% and 10.7%, respectively. Here the direct conversion of syngas to low-carbon olefins are realized at low temperature and pressure and the formation of methane and CO2 is greatly reduced.

     

/

返回文章
返回